Valve control sealing accumulator cases

FOB Reference Price:Get Latest Price
$5.00 - $10.00 / Piece | 2000 Piece/Pieces (Min. Order)
Shipping:
Support Sea freight
Report Suspicious Activity
Overview
Quick Details
Brand Name:
zhisheng
Model Number:
6V5ah
Nominal Capacity:
6V5ah
Place of Origin:
Fujian, China
Weight:
250kg
Maintenance Type:
Free
Voltage:
6V
Size:
151*51*92.8
Usage:
UPS
Sealed Type:
Sealed
Supply Ability
Supply Ability:
100000 Piece/Pieces per Day
Packaging & Delivery
Packaging Details
Valve control sealing accumulator cases
Inner packing is by PE plastic bags
Outer packing is by carton46*34*34cm
Port
XIAMEN
Lead Time :
within 15days after receive 30%deposit TT

 Valve control sealing accumulator cases

 

 

type:10-24ah(12v)
function:special for lead acid battery
material:abs renewable raw material,environmental protection.

1. cleanliness: bottom tank, roof, roof and cavity wall cover sheet clean and dry, no oil, plastic, wire and other debris.

2. fineness: molded inside and outside the surface without stripping marks and strain, without any part of any of the crack.


3. standard degree: the end of tank, roof, roof cap color and standard color film basically the same (in the bright light from the plastic shell molded case 30 ± 3cm no visible face and the visible color of the yarns.).


4. protection degree: the end of slot, cover and cover sheet has a protective film protection.


5. dimensions with degrees:

end of tanks, cover evenly with the gap, the gap is less than 1.5mm in all directions;

cover sheet and the direction with the gap less than 0.5mm.


6.impact resistance:

room temperature: the shot put with a 500g 1500mm and 1000mm respectively, from the slot cover for the end of free fall, look no obvious cracks molded case;

low temperature: the samples were placed in -30°c refrigerator to keep chilled 3 hours, and then samples removed from the refrigerator within 1 minute, shot with 500g of 500mm and 300mm respectively from the bottom slot, site for free-fall, and molded case cover without any obvious cracks.


7. heat resistance: the samples were placed in 70 ± 2 °c constant temperature box for 3 hours, the length, width and height changes of less than 1.3mm.

 

type:10-24ah(12v)
function:special for lead acid battery
material:abs renewable raw material,environmental protection.

1. cleanliness: bottom tank, roof, roof and cavity wall cover sheet clean and dry, no oil, plastic, wire and other debris.

 

2. fineness: molded inside and outside the surface without stripping marks and strain, without any part of any of the crack.


3. standard degree: the end of tank, roof, roof cap color and standard color film basically the same (in the bright light from the plastic shell molded case 30 ± 3cm no visible face and the visible color of the yarns.).


4. protection degree: the end of slot, cover and cover sheet has a protective film protection.


5. dimensions with degrees:

end of tanks, cover evenly with the gap, the gap is less than 1.5mm in all directions;

cover sheet and the direction with the gap less than 0.5mm.


6.impact resistance:

room temperature: the shot put with a 500g 1500mm and 1000mm respectively, from the slot cover for the end of free fall, look no obvious cracks molded case;

low temperature: the samples were placed in -30°c refrigerator to keep chilled 3 hours, and then samples removed from the refrigerator within 1 minute, shot with 500g of 500mm and 300mm respectively from the bottom slot, site for free-fall, and molded case cover without any obvious cracks.


7. heat resistance: the samples were placed in 70 ± 2 °c constant temperature box for 3 hours, the length, width and height changes of less than 1.3mm.